High-Quality Cbb61 Capacitor 250VAC~500VAC 50-60Hz Safety Approved

• Type: Polypropylene Capacitor
• Application: General Purpose, AC / Motor, Power, Lighting, Air Conditioner, High Voltage, Fan, Automobile
• Packaging Type: Surface Mount
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: CBB61
• Capacitance: >100uf
• Structure: Fixed Capacitor
• Manufacturing Material: Polypropylene
• Usage: Low Frequency Coupling, High Frequency Coupling, Tuning, Filter, Low Frequency Bypass, High Frequency Bypass
• Transport Package: Carton
• Specification: CBB61
• Trademark: SMILER
• Origin: Guangdong, China (Mainland)
• HS Code: 8532100000
• Production Capacity: 50, 000 PCS Per Day
• Package Size: 37.00cm * 16.00cm * 28.00cm
• Package Gross Weight: 8.000kg

Product Description

 

 

 

 

 

Recommend Products view more >>

 

 

Model Number:	CBB61 with wires
Type	Polypropylene film capacitor
Safety approvals:	CQC/UL/VDE/TUV/CE
Approval standard	GB/T3667,UL810,EN60252-1
Climatic category	25/70/21,25/85/21
Rated voltage	250VAC~500VAC(50-60Hz)
Capacitance range	0.1uf~35uf
Capacitance tolerance	+_5%(J),+_10%(K)
Testing voltage:
Between terminals	2*Un(VAC)/3s(CQC,VDE,TUV),1.5*Un(VAC)/3s(UL)
Between terminals and case	2*Un+1000(VAC)/3s(>=2000VAC)
Insulation Resistance(20)	between terminals and case>=5000/C(100VDC,3s)
Tangent of loss angle(20)	<=0.002(1KHz)
Fault Currency	S0/S3
Place of Origin	CHINA
Packing	More pieces in one inner box or polybag as customer request.
Color	accept customization
Supplier type	OEM factory

Capacitance(uf)	250V	300V	400V	450V	500V
	L/W/H	L/W/H	L/W/H	L/W/H	L/W/H
0.8UF	32*10*20	32*10*20	32*10*20	32*11*22	36*11*22
1.0UF	32*10*20	32*11*22	32*11*22	36*10*20	36*13*23
1.2UF	32*10*20	32*11*22	36*10*20	36*11*22	37*13*24
1.5UF	36*10*20	36*11*22	36*11*22	37*13*24	37*15*27
2.5UF	36*10*20	36*13*23	36*13*23	38*15*25	38*17*28
3.0UF	36*11*22	37*13*24	38*15*25	38*17*28	38*19*31
3.5UF	36*11*22	38*15*25	38*17*28	38*18*29	47*19*31
4.0UF	36*13*23	37*15*27	38*17*28	38*19*31	47*19*33
5.0UF	37*13*24	38*17*28	47*17*28	47*19*33	47*25*35
6.0UF	38*15*25	38*18*29	48*19*31	47*20*35	47*27*37
8.0UF	38*17*28	47*17*31	47*20*35	47*25*35	47*30*43

 

FAQ 1. Which style of capacitor lead out do you available? The lead out of capacitor we available is Wires, pin, insert and terminal. The terminals are divided into 187# (width 4.8mm) and 250# (width 6.3mm). At the same time we accept the customization. 2. Which style Installation hanger of capacitor do you have? We own the Installation hanger styles which in the market selling. The detail please reference follow pictures. At the same time we accept the customization.

3. What color plastic shell do you have?
The general color is black, white and blue etc.
At the same time we accept the customization.
4. Which certificate do you have?
From the company, we own near 15 honour certificates from the government and our customers. The main certificate is the high -tech
enterprises which pass the audit of the government.
At the same time, we own near 20 patent certificates of the production and products.
From the products,We own near 20 certificates which such as CQC, TUV, UL VDE and so on.
5. What are the main parameters of the capacitor?
There main parameter with Capacity and voltage.
6. The unit of capacitor capacity is F (Farad).
The conversion formula of F (Farad) is:
1F(Farad)=1000000μF(Micro method)
1μF (micro method)=1000000pF (picofarad)
The amount of F is very large, generally μF and pF are used as the unit of capacitance.
7. What does CBB mean?
CBB is China's abbreviation for metallized polypropylene film capacitors.
8. The words PO and P2 in capacitor for what meaning?
P0 in the capacitor means non-explosion-proof, and P2 means explosion-proof. The explosion-proof principle of safety
filmcapacitors. The metalized electrode adopts a micro-fuse network structure (as shown in Figure 1). When the capacitor fails,
themicro-fuse is disconnected and the power supply is automatically cut off, thereby preventing the expansion of the fault
andachieving the purpose of self-safety protection.

How to determine the good or bad fan capacitor

Fan capacitors are prone to failure, making them unusable. So how to determine the good or bad fan capacitor? Let's take a look at
the relevant knowledge right away.

How to judge the good and bad of fan capacitor

Measure with pointer multimeter

Rotate the switch to the K-file range, use the meter needle to contact the positive and negative poles of the capacitor to see if
the capacitor has the phenomenon of discharge.

If the meter needle swings up to the right and returns to the left, it proves that the capacitor accident is good; if the meter
needle swings up and slowly returns to a certain position and stops, it proves that the capacitor is leaking and should be
repaired in time.

Measure with digital capacitance meter

Compared with the pointer multimeter, this operation is simpler to check, firstly, the positive and negative meter needles of the
capacitor meter will touch the positive and negative poles of the capacitor respectively. If the value is close to or equal to the
nominal capacity of the capacitor case, it proves that the capacitor is not broken and can be used; if the value is obviously
lower than the nominal capacity of the capacitor case, it proves that the capacitor is damaged and should be replaced with a new
one in time.

Short connect with two wires

Connect the measuring not short circuit capacitor to 220V hole, let the capacitor charge first, short the two wires on the
capacitor, if you hear the sound of snapping and electric spark appears, it proves the capacitor is good. If no spark appears that
proves the capacitor has been damaged.

Precautions when using Fans

* the electric fan in use, if there are hot hands or abnormal smell, slow speed and other faults, to cut off the power supply in time for maintenance. Note that the speed knob to rotate in order, do not rotate between the gear position, otherwise it is easy to make the ceiling fan heat, burn machine.

* regularly remove the fan surface oil, dust, wipe clean with a dry soft cloth. The place of storage should be dry and ventilated to avoid extrusion.

* the fan should have a three-pronged plug and socket with a safe grounding wire. Note that the fan blade is an important part of the fan, must be strengthened to protect against deformation.
* Reasons for installing a starting capacitor in an electric fan.

It is necessary to install a capacitor in the electric fan. The single-phase voltage of 220 volts itself (phase voltage) has no
phase angle, while the household fan motor consists of a main winding and a secondary winding (auxiliary winding).

If the secondary winding is connected in series with a capacitor to reach the angle of the secondary winding electromagnetic field
beyond the main winding, thus generating an angled pulling field in the motor rotor to rotate the rotor, only the three-phase
power supply (line voltage) has a phase angle of 60 degrees between phases, so the three-phase AC motor does not need a starting
capacitor.

How large is the capacitance of an electric fan?

The capacitance of an electric fan is typically 1 to 2 microfarads, mostly 1.2 microfarads. Generally speaking, a capacitor
induction motor contains 2 windings, the start winding and the run winding, which are 90° apart in space.

Of course, the capacitance size is related to the fan size, for example: 16": 1.5μ, 12 to 14": 1.2μ, 8 to 10": 1μ, ceiling fan:
2.2 to 2.5μ, table fan: 1.2 to 1.5μ, and turntable fan: 1.0 to 1.2μ.

For more information about CBB61 450 VAC capacitor 2.2uf 400v capacitor Cbb61 fan capacitor 3.5uf 2.2 MFD, we are glad to answer
for you.

More detail of our productrs, please contact us.

Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.